Chevrolet, Small Block, 6.125 in. Length, Connecting Rod
Call for Availability
K1 Technologies Chevrolet Small Block Connecting Rod, 6.125 in. Length, 0.927 in. Pin, 2.225 in. Journal, 7/16 in. ARP 2000 Bolts, Forged 4340 Steel, H-Beam, Set of 1.
K1 Technologies connecting rods are manufactured with optimized strength and weight characteristics in mind to deliver reliable performance. Forged from 4340 steel, K1 rods featured a shot-peened surface finish which smooths surface blends and reduces potential stress profiles. K1 connecting rods are held to strict quality standards and undergo magnetic particle testing to ensure material properties are free of flaws. Each rod is also subject to bore tolerance compliance, holding them to +/- .0001” after finishing. Additionally, K1 rods are balanced and tested to be within +/- 1 gram per end. A dual-ribbing design on the rod caps of K1 connecting rods helps maximize strength and allows the rod big end to maintain roundness as engine RPMs increase. Full-floating, precision-honed bronze bushings are fixed into the small ends of the rods for low friction and high wear resistance. Fitted with ARP 2000 rod bolts rated at 200,000 psi tensile strength for most applications, K1 connecting rods deliver an industry-leading combination of strength and value.
- 4340 Forged Steel for strength, toughness, and resistance to impact
- High quality ARP 2000 fasteners included
- All rods are finished in the USA and held to very tight tolerences Bores finished to +/- .0001 in. and weight to +/- 1 gram per end
- Shot peened for improved fatigue life
- Premium bronze wrist pin bushings
- Designed by in-house engineering team for high-stress racing applications
Notice: Product Images may differ from the actual product. Image may be a representation of this item.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and/or harm. For more information, go to www.P65Warnings.ca.gov
|Bolt Part Number||BT71601-S|
|Connecting Rod Finish||Shot-peened|
|Main Bearing Bore Diameter||2.225|
|Main Bearing Width||0.940|
|Material||Forged 4340 Steel|
|Mounting Hardware Included||Yes|
|Product Types||Engine Connecting Rod|
|Weight Matched Set||No|
|Wrist Pin Diameter||0.927|
|Wrist Pin Journal Bushing Width||1.010|
|Wrist Pin Style||Floating|